Novritsch SSG24 Airsoft Sniper Rifle
The Novritsch SSG24 is a spring powered airsoft sniper rifle with internals that can handle springs up to M190 (650fps). It has a precision hop-up chamber and a 6.01mm precision barrel installed for exceptional accuracy out of the box.
Unlike most airsoft sniper rifles on the market, the SSG24 needs NO further tuning or modifications. The Novritsch SSG24 is a no-compromise out of the box solution for the airsoft sniper who accepts nothing less than perfection.
Due to US-law the rifle comes with an orange tip. The black tip can be found here.
How To Order
The SSG24 stock is made from glass fiber reinforced polymer - just like the stock from the real M24. Due to the material thickness of 7 mm the rifle stock is extremely durable with no flex at all. To eliminate outer barrel wobble, an additional steel screw (bipod stud) in front of the rifle connects the outer barrel to the stock.
With the M24 style stock adjustment, you can fit the Novritsch SSG24 to the length of your arms. The two sling swivel attachment points and the bipod mount are made of steel and countered with steel nuts on the inside of the stock. The metal trigger guard is enlarged to allow gun manipulation with gloves on.
The entire receiver is made of metal and has it’s individual Novritsch SSG24 serial number. The receiver contains two POM glide rings which ensure a smooth and easy bolt pull. The extended Picatinny rail on top is mounted with four steel screws to the receiver. Underneath the front screw of the rail sits a threaded screw which ensures that the outer barrel can't turn.
The drill fluted outer barrel is CNC machined from a 4 mm thick aluminum pipe. No matter how often you fall with this gun, you won’t be able to bend or break any of the parts. The CNC machined end-cap has an O-ring insert to stabilize the inner barrel. An additional steel screw (bipod stud) ensures that there's no play between stock and outer barrel.
The black oxidized steel cylinder shaft is pinned with three spring pins onto the base of the bolt handle. This, combined with the hard anodized aluminum cylinder head makes for a durable base to compress air. A rubber pad on the cylinder head helps to reduce noise and impact vibrations of the shot. The length of the nozzle is optimized for perfect BB placement inside the hop up bucking, which results in a repeatable and consistent BB backspin.
The spring guide is made of polished stainless steel. The high-speed piston is made of many different materials to provide the best piston characteristics possible. The rubber seal cap is for perfect seal + impact absorption. The lightweight aluminum shaft is for fast acceleration. The POM glide ring allows for smooth action and finally the hardened steel piston base for durability. All cylinder components can easily handle springs up to M190. The SSG24 springs are made from German pianowire springsteel which allows easy compression and fast return.
2 stage trigger
For maximum control of your shot, the SSG24 comes with a 2 stage, 90° trigger.
First Stage: Adjustable and extremely lightweight trigger travel. Pull the trigger back until you can feel the resistance increase to the second stage.
Second stage: The trigger weight increases but it’s very short and crisp. You will be able to feel exactly when the shot will break.
Both the trigger and the piston sear are made of hardened double heat-treated steel. Due to the extreme hardness of these parts the SSG24 trigger box can easily handle springs up to M190 / (650 fps w/ 0.2g BBs).
Spring Guide Stopper
The spring guide stopper is made of hardened steel. It’s designed in a way that applies constant pressure on the base of the cylinder. This means that the cylinder is always in the exact same place. No play of the cylinder results in consistent nozzle placement in the hop up bucking. Therefore the BB backspin of the SSG24 is extremely consistent and repeatable.
The hop-up adjuster of the Novritsch SSG24 is easily accessible from the outside. There are no tools needed, which makes fine adjustments in the field an easy task. The adjustment assembly is on both sides of the chamber to avoid side hop effects. The hop-up arm is CNC machined from aluminium to ensure that there is little tolerance and no play or flex. The contact points of the hop-up arm are shaped to the Hopup rubber for equal pressure on the BB.
The hop-up is made of a soft silicone with an extremely high friction coefficient. It sits tightly inside of the hop-up chamber which provides a 100% seal. When you close the inner barrel with your finger and pull the trigger, the piston will stop before hitting the cylinder head due to the perfect air seal.
The surface of the 475mm long 6.01mm inner barrel is hard oxidized to increase the surface hardness to a point where it won't wear anymore. It’s straightness and inner diameter get measured individually before it finds its place in the SSG24. Additionally, the barrel is stabilized through a barrel spacer in the middle of the outer barrel and an o-ring in the endcap of the outer barrel.
The SSG24 magazine can hold 28 BBs. Due to its transparent plastic, you can keep track of how many BBs you have left in your gun. The combination of the side guides and the spring mechanism ensures that the reloads are smooth. The top part of the magazine with the feeding lips is separated from the main body of the magazine and presses itself into the hop-up chamber with the follower spring.
Weight: 2600g Length: 1095mm - 1155mm
The SSG24 comes in a slick black hardshell case with four locking points. The foam inserts will keep your SSG24 safe when you are traveling to game sites either with your car or on the plane. The manual of the gun contains a link to exclusive video guides on how to adjust, clean, maintain and get the best performance out of your Novritsch SSG24 sniper rifle. Also, included is a bottle of Novritsch Sniper BBs, a sniper patch for your battle dress uniform and a barrel cleaning rod.
M40A3 Conversion Kit with Front Rail, Scope and Bipod
We understand that having the ability to customize the rifle to make it look unique is important to many players. That's the reason why we're constantly developing new accessories and pushing the limits of what's possible! The SSG24 will always come with the M24 stock, but it is a highly customizable platform. Currently, we offer five different stocks, four of which are made of real wood, a left-hand conversion kit, different bolt handles, outer barrels, extended rails, fluted cylinders, suppressors and more. Click HERE to visit the SSG24 accessory shop to make your rifle look unique!
Enlarged Bolt handle
Enlarged 90° steel bolt handle for faster bolt racking. Drop in fit for SSG24 and M40 conversion kit.
FPS Adjuster Rings
Finetune the fps/power of your rifle exactly to the legal limit of your field with the fps adjuster rings.
Left-hand Conversion Kit
This conversion kit enables left-handed people to operate the SSG24.
Frequently Asked Questions
Will I have Feeding Problems with the SSG24?
No. All new SSG24s come with Gen2 Magazines. The first 100 customers who had this problem got their Gen1 replaced for Gen2 mags for free.
Do you ship to my state in the US?
The SSG24 is shipped from our warehouse in Pennsylvania to every state in the US.
I have a question about the gun in any way
What if something breaks? Will spareparts be available?
Nothing will break. If you still manage to break it somehow - yes, spareparts are available here.
Why is the gun so cheap / expensive?
Because it's good. A cheap $130 USD China made sniper rifle feels like a Nerf toy gun compared to the SSG24. If you upgrade an airsoft sniper rifle to this performance level, both internally and externally, you will spend at least $1000 USD. I can offer it for this price since it gets shipped directly from the manufacturer to the customer. Therefore you don't need to pay for distribution and retail which is usually about 50% of the end consumer's price.
I am new to airsoft sniping - is this gun for me?
Yes, it's a great sniper rifle for beginners, since you don't have to do any complicated tech work to make it shoot well.
jQuery(position).parent().parent().find(".boxContent").removeClass( "short" );