Snipers
SSG11
The endgame of Airsoft Sniping. No Teching, just results
SSG11 Airsoft Sniper Rifle
$359
Meet the SSG11 – the endgame of airsoft sniping. Distilled from 18 years of trigger time and R&D, it arrives pre-upgraded and match-ready for players who want to win, not tech. Expect repeatable long-range precision, intuitive operation, and rock-solid reliability through full game days. Open the box, dial it in, and get to work. No tinkering, just results.
SSG11 Features:
- Full Thrust (6.44 mm) and 6 mm variants out of the box; use up to 0.62 g BBs
- Up to 6.5 J muzzle energy with 0.62 g BBs (Full Thrust variant)
- One-piece CNC aluminium upper receiver & barrel with stainless steel thread inserts
- Full CNC hop-up unit with clicking TDC adjustment wheel
- Toolless quick spring exchange in under 1 minute
- Our quietest spring sniper once fitted with our aftermarket parts
- Airbrake (no powerloss due to 47 cm³ air volume)
- Piston weights
- Rifle Suppressor
- High-capacity double-stack magazines: 58 BBs (6 mm) / 54 BBs (6.44 mm)
- Precision stainless-steel bull inner barrel (10 mm OD)
- High-volume stainless steel cylinder – 47 cm³ (≈ 2.87 in³)
- Highly modular chassis with lots of customising options
- Firing pin indicator
- Immortal R-hop style bucking
- Weight adjustable piston design ready for use with aftermarket weights
- Tight air seal even with the strongest springs on the market
- Fully ambidextrous – left-hand ready
- 2× QD sling points
- 3× FPS adjuster rings included
- Accepts VSR-10 barrels and buckings with the compatibility kit.
- 25 years free spare parts warranty. (T&Cs apply).
- Extensive SSG11 specific video academy.
- Designed by passionate Airsoft players in Vienna, Austria.
- Vienna-based Tech support team.
Specs
Magazine capacity: 58 BBs (6 mm) / 54 BBs (6.44 mm)
Weight: 5.29lb
Overall Length: 37.2″ Collapsed / 40.6″Extended
Inner barrel diameter: 6.03mm ID (6mm) / 6.44mm ID (Full thrust) / 10mm OD
Inner barrel length: 15.1″
What's in the box?
- SSG11
- Magazine
- FPS Adjuster Rings
- Cleaning Rod
- Manual
BB Weight Recommendation
Check out: BB weight recommendations
Additional Info & Warnings
All variants can handle the strongest springs.
6mm Joule measurements taken with Novritsch 0.46g BBs; FPS with Novritsch 0.20g (Full thrust fps values calculated).
Allow a break-in period of ~200 BBs for the hop-up to settle.
This replica has a permanently attached orange tip. Any attempt to remove it voids the warranty for any related parts (e.g., the inner and outer barrel). Removing or covering the orange tip may be illegal in your state. Always check and follow local laws.
Check out bundles to save more:
Frequently used with:
Black
OD Green
Tan
QD Assault Sling V3
Select options
This product has multiple variants. The options may be chosen on the product page
Green
Black
Coyote Brown
Sniper Gunbag
Select options
This product has multiple variants. The options may be chosen on the product page
Sold out
Out of stock
SSG11 Grip panels V2/V3
Select options
This product has multiple variants. The options may be chosen on the product page
Black
OD Green
Flat Dark Earth
SSG11 Short Dummy Magazine
Select options
This product has multiple variants. The options may be chosen on the product page
SSG11 Trigger V2 & V3
Select options
This product has multiple variants. The options may be chosen on the product page
Description
25 years
of free spare parts warranty
We want this rifle to grow old with you. We trust the quality, and that's why it comes with a 25-year free spare part supply. Any part that breaks in the next 25 years is on us. Period.
Full Thrust
incorporated
To push the limits, the SSG11 also comes in full thrust with a bigger, heavier BB (6.44mm) for more range, accuracy and stability in wind. Fully legal in Germany, comes with 6.44mm F-mark.
THE SSG11 Build
Let us give you an insight into what the SSG11 is.
QUICK SPRING EXCHANGE
The dummy magazine of the SSG11 is not only there for show. It has steel pins and is used to disassemble the cylinder. No need for you to bring any tools it can all be done right before the game, on the field.
ONE PIECE UPPER
The entire upper receiver is a single piece for precise alignment, stability and durability. There is no play between parts as this is all machined as one piece.
LARGE CYLINDER VOLUME
The cylinder is 47 cubic centimetres, it's massive. This means it's capable of pushing a lot more air and therefore transferring a lot more energy, and accommodating airbrake pins without power loss. This is the key to efficiently propel heavy sniper BBs.
FULLY AMBIDEXTROUS
For left-handed users, you can convert it without any additional kit. To change it, unscrew the bolt handle (be careful to keep the springs inside) and flip it to the other side. You also need to change the QD point to the opposite side to clear the way for the bolt handle.
FIRING PIN INDICATOR
Unsure if you racked your bolt after your last shot? Simply look down for the red indicator that your rifle is cocked. We loved this feature on the SSG96 so much that we had to have it on the SSG11.
DOUBLE STACK MAGS
These new magazines hold twice the amount of BBs by stacking them next to each other. They can hold 58BBs (54 6.44mm Full Thrust BBs). With just two mags, you have more than a hundred rounds, plenty for one game.
TDC HOP-UP
The TDC wheel at the front of your rifle can be turned without even having to take your hand off the handguard. It also has distincts clicks you can feel, to ensure you get the amount of hop you desire.
CNC HOP-UP UNIT
A one-piece full CNC hop-up chamber with 360° locking mechanism for precise barrel alignment.
WEIGHT ADJUSTABLE PISTON AND FPS ADJUSTER RINGS
The piston is threaded and ready to incorporate aftermarket weights of your choice. Additionally, the SSG11 comes with 3 fps adjuster rings of different sizes to allow you to fine-tune your rifle to the power you desire.
IMMORTAL BUCKING
This R-hop 65° Shore A bucking has no anti-rotation rim or nub. This means you can extend its lifetime considerably by rotating it.
STAINLESS STEEL INNER BARREL
It doesn't bend, rust or scratch easily. It excels in hardness and rigidity, which are essential for achieving less vibration and perfect accuracy. The outer diameter is 10mm thick just to double down.
Free standing magazine
We redesigned the traditional magazine retention system to be completely independent of the stock, ensuring consistently reliable feeding. It connects to the upper and that's it.
Steel Threads
These stainless steel thread inserts ensure that the SSG11 upper withstands the impacts and vibrations as well as repeated disassemblies without stripping the threads.
QD Points
QD points are now the standard to use the same sling with all your rifles. The SSG11 comes with two of them, and you can add a third aftermarket QD point to the front of the handguard if you want it.
Full Potential
Camo & Accessories
With a whole ecosystem around it, it's up to you to pick how to level up the SSG11 and yourself as a marksman.
Pre-built 6mm bundle
SSG11 Bundle
From: Original price was: $540.80.$509.90Current price is: $509.90.Pre-built FULL THRUST bundle
SSG11 FULL THRUST 6.44mm Bundle
From: Original price was: $533.80.$504.09Current price is: $504.09.
- The SSG11
what's in the box?
More about
the SSG11 Project
The SSG11 on the field
More Reviews
A community perspective
TOWER DEFENSE
There isn't just one way to play airsoft
Full Support
To put you on the next level we have a SSG11 specific video academy to know how to handle and maintain this rifle.
We also offer all the spare parts you might ever need to make sure that you will never have to get rid of your rifle because you can’t find the right part for it!
And if you’re in trouble, our Vienna-based tech support is on standby to help you.
You might also like
-30%Hot
up to 30% off
Kreuzotter
Multicam
Multicam Tropic
Flecktarn
Everglade
Coyote
Green
Black
Wolf Grey
You may also like…
Kreuzotter
Multicam
Multicam Tropic
Flecktarn
Amber
Everglade
Green
Black
Coyote Brown
Black
OD Green
Flat Dark Earth
BBs
Gas
Batteries & Chargers
Speedloaders
Magazines
Grips & Stocks
Kreuzotter
3D Ghillie
Airsoft Uniforms
Patches
Airsoft Holster
Face/Eye Pro
Transport
Grenades
Gadgets
EDC & Merch
3D Print Files